 |
 |
|
|
|
|
|
|
|
|
|
|
|
New and Featured Products
For more information about the products listed below,
please contact your local photo dealer or Quantum directly.
Announcing a new Quantum DVD...
See what Quantum products can do for you.
|
|
October 2008
|
September 2008
For the new Nikon SB900 flash, Quantum recommends the Turbo series battery packs with CKE or CCKE cable .
However the Nikon SB900 flash may cause a Turbo 2x2, Turbo SC, Turbo C or Turbo AC battery to shut down or slow down. (The original Turbo Battery is not affected)
If you notice this condition, Quantum has a software upgrade for the above mentioned Turbo models. This upgrade is free for affected Turbo units under warranty. Out-of-warranty Turbo 2x2, SC, C, or AC batteries can be upgraded for $49.
Note: This upgrade is needed for the Nikon SB900 only. Also, if you possess units with the following serial numbers, or higher, your Turbo is already upgraded:
Unit serial numbers already upgraded:
Turbo 2x2 S/N R243 or above
Turbo SC S/N R274 or above
Turbo C S/N R112 or above
Turbo AC S/N Q092 or above
Send your Turbo 2x2, C, AC or SC to the address below, with a note indicating "SB900 upgrade."
For non-warranty upgrades provide your VISA, MC, or AMEX credit card info (for security, no emails please!), or else enclose a check for $49. (Checks could take up to 15 days to clear). NY State residents must include the appropriate sales tax. Return shipping within the U.S.A. is included.
For warranty upgrade, please provide a copy of your bill of sale.
The in-house turn-around time is estimated at 1-2 weeks. Please use the address below:
SB900 Upgrade
Service Department
Quantum Instruments
10 Commerce Drive
Hauppauge NY 11788-3968 USA
|
March 2008
Get beautiful, studio-quality lighting, perfect for digital and film photography, from a portable dedicated flash!
Qflash "Digital" model T5d-R is "dedicated" to the latest digital and film camera systems through its own QTTL® through-the-lens dedicated exposure control. Parabolic reflectors produce softer, cleaner light. And they quickly interchange for bare bulb, wide angle, diffused, and telephoto reflectors. Flash heads swivel and bounce and lock into position with one button control.
In addition to full dedication Qflash operates in Manual, Auto, TTL, and Strobo modes. In Automatic mode, Qflash power adjusts in 1/3 steps over wide ranges-- from f/1.4 to f/22 for ISO 100 film- in 25 precision settings. In Manual mode Qflash displays 19 power settings from full to 1/64th power, in 1/3 step increments.
Qflash T5d-R gets its power from Quantum Turbo®, Turbo 2x2, Turbo SC, Turbo Compact, Turbo AC or Turbo Z. Qflash power exceeds that of typical shoe-mount and handle-mount flashes, which allows for greater distances, bigger shots, and much more bounce power. That, combined with its studio quality light give professionals just the portable lighting they need.
Purchase a Qflash T5d-R and receive a $75 dollar rebate from Quantum, add any model Turbo; Turbo SC, Turbo 2x2, Turbo Compact, Turbo AC or Turbo to your Qflash order and double your rebate to $150.
You must make your purchase during
the second quarter of 2008,
April 1 through June 30, 2008.
Look for a rebate coupon in Qflash and Turbo boxes, fill out all the required information and mail the coupon with requested materials to the address shown on the coupon. If you did not find a coupon in the Qflash or Turbo box you can download a coupon at www.qtm.com/rebates
Only one coupon is needed per Qflash or Qflash/Turbo combo.
There is no rebate for purchasing a Turbo without a Qflash.
The Quantum products, Qflash T5d-R and Turbo Batteries, must be purchased from a Quantum Instruments Inc. authorized dealer in the U.S. Rebate checks will only be mailed to U.S. addresses.
Quantum is proud to present...
A New Pro-Level Seminar for Better On-Camera Flash Photography
On camera flash is one of the biggest troublelmakers in all of professional photography - and it's one of one of the easiest problems to fix!
Quantum and ShootSmarter.com have teamed up to bring you a one day seminar aimed at making all your on-camera (and off-camera) flash images better, easier - and more profitable too.
Learn the Secrets to TTL, AUTO and MANUAL flash with great exposure and color.
Spend a day with world-class TTL expert Will Crockett as he shows you how to make your Nikon, Canon or Fuji DSLRs produce excellent flash exposure, color and light quality. Those of you who have seen our latest instructional DVD or have viewed it online at www.qflashacademy.com know Will is not only a terrific speaker but he knows Qflash inside and out.
Now you can let the camera and the flash do the work instead of fixing the files in Photoshop or Lightroom.
Watch as Will shares the camera setup, shooting tips and more while he actually shoots live TTL event shots, lights the entire room, and uses AUTO fill flash like a champ using both on-camera and off-camera flashes.
Buckeye's own resident educator, Nick Coury joins in to share some great time saving and software tips on how to get those great files in and out of your lab to maximize profits.
Join us at these locations:
Monday April 7th in Cleveland
Monday April 14th in Pittsburgh
Monday April 28th in Cincinnati
Monday May 12th in Fort Wayne, IN
Cost is $79 per person, which includes a nice lunch and $150 worth of coupons you will really use.
More info and pre-registration online at www.BetterFlashSeminar.com
And don't miss the Will Crockett monthly columns on www.ShootSmarter.com sponsored by Quantum!
See you there!
Quantum Compatibility for the Canon EOS 1D Mark III Digital Camera
Quantum's QTTL™ D23wR adapter links the new Canon XTi to Quantum's Qflash. The D23wR adapter interfaces with the Qflash series 5d-R, 5d, 4d, 2D "Digital" flashes to provide full dedication to both digital and film professional cameras.
The following features are available with the Quantum D23wR QTTL Adapter:
|
ETTL-2
ETTL
Auto focus Assist
Viewfinder ready indicator
Qnexus with Qflash 5d-R
|
Rear curtain sync
Auto Ratio / Fill-flash
Pre-flash metering
Shutter speed control
|
Qnexus with Qflash 5d-R
Wireless TTL Ratio w/ Qflash 5d-R
Wireless TTL w/ Qflash 5d, 4d & 2D
|
Remote Shutter Compatibility for:
Canon EOS 1D Mark III
Use a FreeXwire FW43 two step remote shutter release cord to turn on, focus and fire the Canon EOS 40D camera.
Mount your secondary camera behind a basketball goal for a photo with a different perspective. In the studio, take away sync cords to trip over. Have freedom of movement when taking fashion portraits- no more standing behind your camera viewfinder. It's a must have photo accessory for portrait, sports or nature photographers.
Quantum Compatibility for the New Nikon D3 and D300 Digital Camera
Quantum's QTTL™ D22wR adapter links the Nikon D3 & D300 to Quantum's Qflash. The D22wR adapter interfaces with the Qflash series 5d-R, 5d, 4d, 2D "Digital" flashes to provide full dedication to Nikon iTTL digital professional cameras.
The following features are available with the Quantum D22wR QTTL Adapter:
|
iTTL
Auto Ratio / Fill-flash
Auto focus Assist
Viewfinder ready indicator
|
Rear curtain sync
Qnexus with Qflash 5d-R
Pre-flash metering
Shutter speed control
|
Wireless TTL Ratio w/ Qflash 5d-R
Wireless TTL w/ Qflash 2D, 4d & 5d
|
Turbo 2x2 & Turbo Compact Power for the Nikon D3 & D300 Digital Cameras
Nikon D3
Connect the Turbo 2x2 and digital power cord SD10 or Turbo Compact and digital power cord YDC10 directly into the dc input of the Nikon D3. The second output of the Turbo 2x2 can be used to power either the Qflash Digital, Nikon SB800DX or SB80DX flash or other compatible flash units.
Nikon D300
Connect the Turbo 2x2 and digital power cord CD100 or Turbo Compact and digital power cord YDC100 directly into the dc input of the Nikon D300. The second output of either Turbo can be used to power either the Qflash Digital, Nikon SB800DX or SB80DX flash or other compatible flash units.
Remote Shutter Compatibility for:
Nikon D3 & D300
Use a FreeXwire FW44 two step remote shutter release cord to turn on, focus and fire the Nikon D3.
Mount your secondary camera behind a basketball goal for a photo with a different perspective. In the studio, take away sync cords to trip over. Have freedom of movement when taking fashion portraits- no more standing behind your camera viewfinder. It's a must have photo accessory for portrait, sports or nature photographers.
Metz 58AF & 54MZ Series Flash Now Compatible with Quantum Batteries
Connect a Turbo SC, C, Z, 2x2 or Turbo Battery to either the Metz 58AF Series (Turbo Flash Cable CM58) or Metz 54MZ Series (Turbo Flash Cable CM54). You get consistent, ultra fast recycling and all day capacity.
Turbos put approximately 330 volts into the flashes capacitor/flash tube circuit, bypassing the TTL and LCD low voltage circuits. "AA" batteries still must be used to power these low voltage circuits. All power packs display power remaining and charge level using an LED "fuel gauge".
Use a Quantum Battery 1+ or Quantum Battery 1 Compact with a power module MKZ3 connected into the flashes battery compartment. Use a Bantam Battery or
Quantum Battery 1 Compact with a power module XKZ3. You get consistent recycling and typically 3 times the capacity of "AA" batteries.
Flash Cable CM58 / Turbo SC, C, 2x2, Z & Turbo
Metz 58AF Series
Flash Cable CM54 / Turbo SC, C, 2x2, Z & Turbo
Metz 54MZ Series
Flash Cable MKZ3 / Quantum Battery 1+, 1c
Metz 58AF Series
Metz 54MZ Series
Flash Cable XKZ3 / Bantam Battery, Battery 1 Compact
Metz 58AF Series
Metz 54MZ Series
|
September 2007
Canon EOS 1D Mark III, & 40D
Quantum is now taking orders for QTTL adapter D23wR.
This adapter is compatible with Canon EOS 1D Mark III, and 40D (as well as all Canon models 10D, 5D, D30, D60, 20D, 30D, EOS 1D/1Ds, EOS 1D/1Ds M II, Rebel 300D).
Please see your photo dealer for ordering. Note that the previous QTTL adapter D13wR is compatible with all Canon models above, except EOS 1D Mark III, and 40D.
For those photographers that own a D13n, D13w or D13wR QTTL adapter and have purchased a Canon EOS 1D Mark III, an upgrade is now available for your QTTL adapter (Upgrade cost $39).
Send the QTTL adapters in question carefully packaged and insured to :
Service/ Upgrade Department
Quantum Instruments
10 Commerce Drive
Hauppauge NY 11788-3968 USA
|
Quantum Compatibility for the Canon EOS 40D Digital Camera
Quantum's QTTL™ D23wR adapter links the new Canon 40D to Quantum's Qflash. The D23wR adapter interfaces with the Qflash series 5d-R, 5d, 4d, 2D "Digital" flashes to provide full dedication to both digital and film professional cameras.
| The following features are available with the Quantum D23wR QTTL Adapter: |
| ETTL-2 |
TTL Ratio / Fill-flash |
Rear curtain sync |
| ETTL | Auto Ratio / Fill-flash | Qnexus with Qflash 5d-R |
| Auto focus Assist | Pre-flash metering |
| Viewfinder ready indicator | Shutter speed control |
Remote Shutter
Compatibility for:
Canon EOS 40D
Use a FreeXwire FW43 two step remote shutter release cord to turn on, focus and fire the Canon EOS 40D camera.
Put your secondary camera behind a soccer goal for a photo with a different perspective. In the studio, take away sync cords to trip over. Have freedom of movement when taking fashion portraits- no more standing behind your camera viewfinder. It's a must have photo accessory for portrait, sports or nature photographers.
Turbo Power for Canon 40D
Connect the Quantum Turbo, or 2x2 and digital power cord CD30 or Turbo Compact and digital power cord YDC30 directly into the dc input of the Canon EOS 40D. The second output of either Turbo can be used to power any of the Qflash Digital flashes, Canon 580EX-II, 580EX or other compatible flash units.
Turbo, 2x2 / Digital Camera Power Cord CD30 for Canon 40D
Turbo Compact / Digital Camera Power Cord YDC30 for Canon EOS 40D
Quantum Compatibility for the Canon EOS 1D Mark III Digital Camera
Quantum's QTTL™ D23wR adapter links the new Canon EOS 1D Mark III to Quantum's Qflash. The D23wR adapter interfaces with the Qflash series 5d-R, 5d, 4d, 2D "Digital" flashes to provide full dedication to both digital and film professional cameras.
| The following features are available with the Quantum D23wR QTTL Adapter: |
| ETTL-2 |
Pre-flash metering |
TTL Ratio / Fill-flash with Qflash 5d-R only |
| ETTL |
Shutter speed control |
Auto Ratio / Fill-flash with Qflash 5d-R only |
| Auto focus Assist |
Rear curtain sync |
Qnexus with Qflash 5d-R only |
| Viewfinder ready indicator |
|
|
Remote Shutter
Compatibility for:
Canon EOS 1D Mark III
Use a FreeXwire FW43 two step remote shutter release cord to turn on, focus and fire the Canon EOS 40D camera.
Mount your secondary camera behind a basketball goal for a photo with a different perspective. In the studio, take away sync cords to trip over. Have freedom of movement when taking fashion portraits- no more standing behind your camera viewfinder. It's a must have photo accessory for portrait, sports or nature photographers.
Invitation to hear your thoughts.
Quantum learns a lot from our customers' comments and requests. They help us improve our products and develop new ones to satisfy photographers' needs and requirements. If you would like to contribute your thoughts we invite you to take a short survey about your photography and needs. We look forward to hearing what added features and new equipment you would like to see from Quantum.
Click here to take the Quantum Survey
We are dedicated to providing photographers with the finest quality products, proudly designed and manufactured in the USA.
|
July 2007
New Canon Flash 580EX II is Compatible with Quantum Batteries
Available Now
Connect a Turbo, Turbo 2x2, Turbo SC or Turbo Z Battery to the Canon 580EX II using Flash Cable CZ. Use the Flash Cable CCZ between the 580EX and a Turbo Compact when it is attached to the bottom of a camera or bracket. You get ultra fast recycling and all day capacity.
Turbos put approximately 330 volts into the flashes capacitor/flash tube circuit, bypassing the TTL and LCD low voltage circuits. "AA" batteries still must be used to power these low voltage circuits. All power packs display power remaining and charge level using an LED "fuel gauge".
Use a Quantum Battery 1+ or Quantum Battery 1 Compact with a power module MB2 connected into the flashes battery compartment. Use a Bantam Battery or
Quantum Battery 1 Compact with a power module XB2. You get consistent recycling and typically 5 times the capacity of "AA" batteries.
Flash Cable CZ / Turbo, 2x2, SC, Z, Turbo AC
Flash Cable CCZ / Turbo Compact
Flash Cable MB2 / Quantum Battery 1+, 1c
Flash Cable XB2 / Bantam Battery, Battery 1 Compact
Notice: Current Owners of Canon 580EX II ( TYPE II ONLY)
and Turbo 2x2, Turbo SC, Turbo C
Important Operating Notice
Solution: Set Flash Custom Function #01 Auto power off to Disable (1)
Problem
The custom function on the Canon 580EX II is set to (0)enabled when shipped.
This function enables the flash go to sleep after a predetermined time of idling.
If custom function 01 is not turned off the flash will go to sleep and the Turbo Batteries will shut down.
If C.Fn 01 is not disabled you must turn the Turbo OFF and then ON otherwise it will not wake-up when the flash awakes.
Disabling this function will prevent the above Turbos from shutting down.
Connecting Procedure for Canon System / Canon 580EX II with above Turbos
If the procedure below is not followed the Turbo with not operate.
Mount flash to camera.
Connect Turbo long CZ/short CCZ flash cable between 580EX II & Turbo 2x2, Turbo SC or Turbo C.
Turn on camera and flash.
Turn on the Turbo last.
Quantum Compatibility for the Canon Rebel XTi (EOS 400D) Digital Camera
Quantum's QTTL™ D13wR adapter links the new Canon XTi to Quantum's Qflash. The D13wR adapter interfaces with the Qflash series 5d-R, 5d, 4d, 2D "Digital" flashes to provide full dedication to both digital and film professional cameras.
The following features are available with the Quantum D13wR QTTL Adapter:
| ETTL-2 | TTL Ratio / Fill-flash Rear curtain sync |
| ETTL | Auto Ratio / Fill-flash |
| Auto focus Assist | Pre-flash metering |
| Viewfinder ready indicator | Shutter speed control |
Remote Shutter Compatibility for:
Canon Rebel Xti (EOS 400D)
Use a FreeXwire FW44 two step remote shutter release cord to turn on, focus and fire the Canon Rebel XTi (EOS 400D) camera.
Put your secondary camera behind a soccer goal for a photo with a different perspective. In the studio, take away sync cords to trip over. Have freedom of movement when taking fashion portraits- no more standing behind your camera viewfinder. It's a must have photo accessory for portrait, sports or nature photographers.
Invitation to hear your thoughts.
Quantum learns a lot from our customers' comments and requests. They help us improve our products and develop new ones to satisfy photographers' needs and requirements. If you would like to contribute your thoughts we invite you to take a short survey about your photography and needs. We look forward to hearing what added features and new equipment you would like to see from Quantum.
Click here to take the Quantum Survey
We are dedicated to providing photographers with the finest quality products, proudly designed and manufactured in the USA.
Cick here to request the FREE Quantum Product DVD with Will Crokett
|
April 2007
ANNOUNCING THE QUANTUM MINI FOLDING SOFTBOX WITH HOT SPOT REDUCER
|
With the new Quantum Mini Folding Softbox QF69, shoot up-close and personal without the worry of over-exposing your subject. Replace the reflector of a Qflash 4d, 5d or 5d-R with the included Hot Spot Reducer and then slip on the Mini Folding Softbox QF69 for very soft, diffused lighting.
The Mini Folding Softbox QF69 gives close to a 180o light spread for use with very wide angle lenses. It's placement on the flash head of a Qflash 4d, 5d, or 5d-R allows for Automatic (using Qflash Sensor), Manual and TTL shooting modes with Qflash.
With the QF69 attached to a Qflash; you can mount this combination to a camera bracket or fasten it to an umbrella bracket for placement on a light stand. When finished shooting, the QF69 folds up very neatly into its carrying case for your convenience.
This new Mini Folding Softbox QF69 joins the Qflash family of specialized reflectors that include: 12x12 Softbox (QF68), Wide Angle Diffuser (QF67A), Bare Bulb Enhancers (QF62Bs/g), Telephoto/Portrait (QF63B) and Snoot (QF63B).
|
New Metz Flash 58AF-1 is Compatible with Quantum Batteries
Available Now
Use a Quantum Battery 1 Compact or Bantam Battery with our flash module XKZ3 connected into the flashes battery compartment. You get consistent recycling and typically 5 times the capacity of "AA" batteries.
If you have a Quantum Battery 1+ use the flash module MKZ3 to deliver power to the Metz 58AF-1 flash.
All Quantum power packs display power remaining and charge level using an LED "fuel gauge". Make sure you get the great birthday or anniversary photo. Remember, you only get one chance to take a once in-a-lifetime photo, so make sure your flash is connected to a Quantum Battery.
News, wedding and other professional photographers depend on Quantum Batteries for consistent, fast recycling for their flash and power pack needs.
Flash Cable MKZ3 / Quantum Battery 1+, 1c
Flash Cable XKZ3 / Bantam Battery, Battery 1 Compact
|
Quantum Compatibility for the Fuji S5 PRO Digital Camera
Quantum's QTTL™ D12wR adapter links the new Fuji S5 PRO to Quantum's Qflash. The D12wR adapter interfaces with the Qflash series 5d-R, 5d, 4d, 2D "Digital" flashes to provide full dedication to both digital and film professional cameras.
The following features are available with the Quantum D12wR QTTL Adapter:
| i-TTL | TTL Ratio / Fill-flash | Qnexus Compatible with Qflash 5d-R |
| D-TTL | Auto Ratio / Fill-flash | |
| Auto focus Assist | Wireless TTL/Ratio | |
| Pre-flash metering | Rear curtain sync | |
| Viewfinder ready indicator | Shutter speed control | |
Connect the Quantum Turbo 2x2 and digital power cord SD10 or Turbo Compact and digital power cord YDC10 directly into the dc input of the Fuji S5 PRO. The second output of either Turbo can be used to power any of the Qflash Digital flashes, Nikon SB800DX, SB80DX or other compatible flash units.
Both Turbo's get their energy from Nickel Metal Hydride (NiMH) technology, providing concentrated power, quick flash recycling, no memory, and long life. Turbo's display remaining capacity on their "fuel gauge" in order to insure that you won't be caught unaware. Indicators show power delivered to the camera and/or flash. When charging, the "fuel gauge" displays the charging progress.
Turbo 2x2 / Digital Camera Power Cord SD10
for Fuji S5 PRO
Turbo Compact / Digital Camera Power Cord YDC10
for Fuji S5 PRO
|
Remote Shutter Compatibility for:
Fuji S5 PRO
Use the Quantum shutter release (motor drive) cord p/n 451 plus Nikon part MC25 with Fuji S5 PRO for remote shutter release with Quantum Radio Slave 2, 4, or 4i. Or, use a FreeXwire FW44 two step remote shutter release cord to turn on, focus and fire the Fuji S5 PRO camera.
Put your secondary camera behind a soccer goal for a photo with a different perspective. In the studio, take away sync cords to trip over. Have freedom of movement when taking fashion portraits- no more standing behind your camera viewfinder. It's a must have photo accessory for portrait, sports or nature photographers.
We are dedicated to providing photographers with the finest quality products, proudly designed and manufactured in the USA.
Additional tips and lessons are available on our home page in the Free Tutorials section.
|
|
November 2006
QUANTUM UNVEILS MOST EXTENSIVE NEW PRODUCT ROLLOUT IN COMPANY HISTORY!
PhotoPlus Expo 2006 -Quantum Instruments Inc., of Hauppauge, New York, is introducing three major new products, as well as numerous new accessories and upgrades. This marks the largest one-time line expansion in the company's history and reinforces its role as an essential supplier of professional photographic instruments:
NEW Qnexus-When mounted to Quantum's new-generation Qflash 5d-R flash units, this ingenious receiver/decoder "reads" wireless TTL signals directly from Canon and Nikon shoe mount master flashes. It integrates multiple high-power Qflash 5d-R's into Canon or Nikon wireless TTL systems where they act as dedicated, full-function remotes controlled totally from the camera's flash menu. Qnexus supports all Canon and Nikon wireless flash functions including Manual, Automatic, TTL and TTL-Ratio.
A Qnexus equipped Qflash 5d-R produces 150 to 400 watt-seconds of beautiful studio-quality lighting (models QFT5d-R and QFX5d-R respectively). Qnexus greatly expands creative options for portrait and event photography. For example, photographers can make a great portable portrait set-up by using a Qflash in a softbox or with an umbrella, as the main light source, and use their Canon or Nikon flash for fill. Or, for those tricky, large group photos, they can use any combination of Qflashes with camera manufacturer's flashes as remotes, all controlled by a Nikon or Canon wireless controller. Qnexus/Qflash adds both power and versatility to the system.
Qnexus features a multi-function LED that indicates it is programmed for either Nikon or Canon wireless flash commands. Qnexus also indicates when the unit receives a command from the on-camera master flash or controller. A channel dial corresponds to the channel settings for Nikon or Canon systems. In addition, "Group" settings can be utilized to control multiple Qflashes with TTL ratios, or combine them in one group for extraordinary wireless flash power.
NEW Qflash 5d-R -("d" for digital and "R" for Ratio)- is the latest evolution in Quantum's proven Qflash portable flash line. The new 5d-R series used with Quantum's FreeXwire digital radio system, now support wireless control of all dedicated camera-flash functions-Manual, TTL, Auto, Auto-fill and TTL-Ratio-up to 500 ft. away!
Qflash 5d-R units blend seamlessly with Canon, Nikon and other popular, professional, digital camera systems using Quantum's proprietary QTTL adapters. In some situations, Qflash even provides capabilities a camera system may not support- such as wireless remote Fill-Flash. Exposure ratios for local and remote Qflashes can also be set from an on-camera
Qflash 5d-R, even if the camera system does not support TTL-Ratio.
Combined, the Qflash 5d-R and FreeXwire systems open up an exciting new world of wireless- creative freedom, where even the most complex lighting set-ups can be accomplished quickly, easily and reliably.
The new 5d-R series includes two models: the Qflash T5d-R powered by Quantum Turbo-series batteries, and the Qflash X5d-R powered by Quantum's Qpaq-X battery system. The T5d-R provides up to 150 watt-seconds of beautiful, studio quality lighting (vs. 50 watt-seconds for shoe mount flashes) while the X5d-R units deliver up to 400 watt-seconds each.
NEW Turbo Slim Compact- A new, ultra-lightweight, ultra-slim, ultra-compact addition to Quantum's popular Turbo battery line. The new
Turbo SC ("S" for Slim and "C" for Compact) provides typical all-day flash shooting capacity like the standard Turbo, yet weighs less than a pound and fits easily in a shirt pocket! "It's so small, light and easy-to-carry"…said one photographer who tried it…"that I completely forgot it was there!"
State-of-the-art NiMH batteries power the Turbo SC for lightning-fast recycling times and high capacity. Despite its mini proportions, it provides up to 225 full-power flashes with Quantum's Qflash units, or 400 shoe mount flashes, on a single 1.5-hour charge. And, like all Quantum batteries, the new Turbo SC features a computerized "fuel gauge" that clearly displays the amount of power remaining and monitors charging progress.
The Turbo SC is compatible with all Quantum "C" and "CC-Series" flash cables. It includes a removable belt clip and a 100 - 240 volt charger. When the unit is registered online using the Quantum web site, Quantum will send the customer a free leather shoulder strap.
NEW Accessories-To help maximize the performance of the Qflash line, Quantum has introduced a new Mini Folding Softbox (QF69) with hotspot reducer. It is ideal for close-up work where a perfectly smooth, soft, diffused look is a must. The QF69 does not obstruct Qflash sensors and can be used with all Qflash series, in all modes. It folds flat and comes with a handy pouch for easy storage/transport.
ALSO NEW--- Quantum has designed a handy, new FreeXwire Bracket (FW25) that conveniently mounts the FW9T Transmitter to the bottom of the camera.
NEW Upgrade-Consistent with Quantum's dedication to "planned non-obsolescence", they are offering a new upgrade Model QF3d-R that gives owners of older Qflash 2 units many advantages of the new Qflash 5d-R series. Highlights include: full digital and film camera dedication using QTTL "D" adapters; wired/wireless TTL-Ratio and Auto-fill for remote Qflashes using FreeXwire; Sensor Limit and over/under exposure indication for Auto and Auto-fill modes.
|
October 2006
|
June 2006
June 2006
Tips for consistent exposures with your digital camera & Qflash
Always do a custom white balance before shooting.
Pre-programmed white balance settings in the camera are for the camera manufacturers flash. The Qflash flash tube has a different color temperature, plus lighting can vary at each photo shoot. Doing a custom white balance will save you time and money whether you use photoshop or a lab.
When shooting TTL use Aperture or Shutter Priority or Manual camera exposure modes.
In Aperture or Shutter Priority and Manual TTL you are more in command of your photos. You can choose the Aperture, Shutter speed or both. When using Program TTL the camera gets to decide Aperture and Shutter speed and this only works for ideal situations. Remember the camera doesn't know whether you want depth of field or not, nor whether you want to show motion or stop motion.
When metering a subject area with a camera use center weight or partial metering instead of matrix or multispot metering.
When using matrix(pattern) or multispot metering the camera looks at the whole scene through the lens to determine exposure information. If there are highlighted and shadow areas in this scene the camera can be fooled into making an incorrect determination on how long the Qflash should stay on leading to an over- or under-exposed photo. Using partial or center weight metering will help you read just the subject area for a proper exposure.
Your Qflash is 150 watt-seconds compared to a 50 watt-second shoe mount flash, when shooting 5 ft. or closer, at ISO 200 or greater, with a wide open F-stop you must always diffuse otherwise your subject will be over exposed.
At ISO 200 or greater, lens opening set to F2.8, F3.5, or F4.5; with Qflash reflector in normal position any subject closer than 7feet will be over-exposed. At ISO 400, closer than 10 feet and a subject is over-exposed. When you use maximum diffusion both are no longer over-exposed. To get up-close and personal with your subjects the best course of action is maximum diffusion to prevent over-exposed subjects.
When using Qflash in Auto/Auto-Fill mode we suggest that you use the Sensor Limit Option, this gives you better control of the amount of flash reaching the subject area.
In Auto/Auto-Fill the Qflash sensor is used to read the scene. The sensor determines when the Qflash will shut down. With ISO 200, F5.6 chosen the minimum to maximum distance (area that the Qflash will try to evenly light) is 4.5 to 40ft. This means that the Qflash will try to deliver an even amount of light from 4.5 to 40ft. To produce an F5.6 at 40ft, with a subject at 10ft. causes the subject to be over-exposed. Setting the Sensor Limit Option to a distance just past the subject, in this case 15ft. eliminates this problem.
Additional tips and lessons are available on our home page in the Free Tutorials section.
|
March 2006
Quantum Compatibility for the Nikon D200 Digital Camera
Connect the Quantum Turbo 2x2 and digital power cord SD10 or Turbo Compact and digital power
cord YDC10 directly into the dc input of the Nikon D200. The second output of either Turbo can be used to power any of the Qflash Digital flashes, Nikon SB800DX, SB80DX or other compatible flash units.
Both Turbo's get their energy from Nickel Metal Hydride (NiMH) technology, providing concentrated power, quick flash recycling, no memory, and long life. Turbo's display remaining capacity on their "fuel gauge" in order to insure that you won't be caught unaware. Indicators show power delivered to the camera and/or flash. When charging, the "fuel gauge" displays the charging progress.
Turbo 2x2 / Digital Camera Power Cord SD10
for Nikon D200
Turbo Compact / Digital Camera Power Cord YDC10
for Nikon D200
Remote Shutter Compatibility for:
Nikon D200
Use the Quantum shutter release (motor drive) cord p/n 451 plus Nikon part MC25 with Nikon D200 for remote shutter release with Quantum Radio Slave 2, 4, or 4i. Or, use a FreeXWire FW44 two step remote shutter release cord to turn on, focus and fire the Nikon D200 camera.
Put your secondary camera behind a soccer goal for a photo with a different perspective. In the studio, take away sync cords to trip over. Have freedom of movement when taking fashion portraits- no more standing behind your camera viewfinder. It's a must have photo accessory for portrait, sports or nature photographers.
|
December 2005
New Canon Flash 430EX is Compatible with Quantum Batteries
Available Now
Use a Quantum Battery 1 Compact or Bantam Battery with our flash module XB2 connected into the flashes battery compartment. You get consistent recycling and typically 5 times the capacity of "AA" batteries.
If you have a Quantum Battery 1+ use the flash module MB2 to deliver power to the Canon 430EX flash.
All Quantum power packs display power remaining and charge level using an LED "fuel gauge". Quantum Batteries typically yield the same power as $2000 worth of "AA" batteries. Make sure you get the great birthday or anniversary photo. Remember, you only get one chance to take a once in-a-lifetime photo so make sure your flash is connected to a Quantum Battery.
News, wedding and other professional photographers depend on Quantum Batteries for their flash and power pack needs.You get consistent recycling and typically 5 times the capacity of "AA" batteries.
Flash Cable MB5 / Quantum Battery 1+, 1c
Flash Cable XB5 / Bantam Battery, Battery 1 Compact
|
October 2005
NEW! D19w QTTL ADAPTER FOR
HASSELBLAD H1/H2 SERIES CAMERAS
Quantum's QTTL D19w adapter links the new Hasselblad H1, H1D, H2 and H2D to Quantum's Qflash. The D19w adapter interfaces with the Qflash T5d, T4d, T2D, X2D & X4D "Digital" flashes to provide full dedication to these professional cameras.
The following features are available with the Quantum D19w QTTL Adapter:
| Wireless TTL | TTL Ratio / Fill-flash |
| Wired TTL | Auto Ratio / Fill-flash |
| Auto focus Assist | Rear curtain sync |
| Pre-flash metering | Shutter speed control |
Viewfinder ready indicator
The following cameras are supported by the D19w adapter. If you don't see your camera listed please check our website for future updates.
Hasselblad H1, H1D, H2 and H2D
|
September 2005
Introducing Quantum's new wireless TTL system, Qflash 5d, and FreeXWires FW7Q, FW8R, FW9T
Quantum's new "QTTL™" system links Qflash 5d series flashes to digital and film cameras -- wirelessly. Get wireless TTL for Canon, Nikon, Olympus, Hasselblad, Mamiya, and Contax cameras. Quantum's QTTL™ Adapters with a FreeXWire FW9T Transmitter will send commands to one or more remote FreeXWire receivers connected to Qflashes.
There are two new FreeXWire receivers. Compact receiver FW7Q plugs directly into Qflash 5d or 4d series flashes. No sync cords or batteries needed! FreeXWire receiver FW8R connects to Qflash for wireless TTL, or it can receive wireless flash sync for any type of shoe, handle-mount or studio flash.
Quantum's QTTL™ system works with all popular TTL systems, including aTTL, eTTL, eTTL-2, i-TTL. Upgrades are available for existing Quantum products to work with this new system: Qflash 4d to 5d; FreeXWire FW10 to FW10w, and D to Dw series QTTL adapters.
Qflash 5d features
Full dedication - Connect a Qflash 5d to a camera using a Dw series QTTL Adapter and make Qflash a powerful, fully dedicated flash that mimics the features of camera manufacturers' flashes.
Wireless TTL with Fill-flash - When teamed with a FreeXWire system, Qflash receives your camera's TTL exposure commands wirelessly. Wireless fill-flash offsets are set on the D and Dw series QTTL adapters, or on the camera.
Wireless Linked Auto with Qflash Ratios - Set up an on-camera Qflash and one or two remote Qflashes with FreeXWires. Control the ratios of the remote Qflashes wirelessly from the panel of the on-camera Qflash. All Qflashes track the f/stop of the camera as you change it.
The following D and Dw adapters transfer camera TTL exposure for wireless transmission by FW9T, FW7Q, FW8R and updated FW10w Transceivers: D10w- Olympus; D12w- Nikon, Fuji, Kodak; D13w- Canon; D19w- Hasselblad; D24- Contax; D25- Mamiya.
NEW! Digital FreeXWires FW7Q, 8R and 9T features
Receiver FW7Q - totally cordless - Team up a FW7Q Receiver with a FW9T Digital Transmitter. FW7Q mounts flush to Qflash 4d or 5d. Mount an FW9T Transmitter and FW12 Hot Shoe Adapter to the camera hot shoe to be totally wireless. Or, add a D or Dw series QTTL adapter to the camera and transmit your camera's f/stop, ISO, and TTL exposure information to the remote Qflash 5d.
Receiver FW8R - Use this receiver with any shoe, handle mount flash or Qflash as a wireless flash sync. When connected to a Qflash (with an FW31 accessory cable) camera TTL information is relayed wirelessly. Slide the Shutter MD Delay switch to the MD position, connect a Shutter Release (Motor Drive) Cord from the Receiver FW8R to the camera shutter release connection activate a camera shutter up to 1000ft. away.
Let Quantum update your existing FreeXWire FW10 to FW10w to perform the same functions as the new FW8R. (Contact Customer Service for details)
Transmitter FW9T- Simple Operation - Match up the FW9T with a FW7Q, FW8R or an upgraded FW10w Transceiver. You can set up sets of FreeXWire units to work together on the same channel, or separate groups of FreeXWires to work in independent channels. Each channel has an additional four "Zones" that can be activated in 15 possible combinations.
*** $50.00 ***
FREEXWIRE REBATE
For purchase of an [FW9T and FW8R] or [FW9T and FW7Q] between Sept. 1, 2005 and November 30, 2005. Only the purchaser/end user may submit this claim for rebate. For each additional FreeXWire purchased you will receive a $25 additional rebate. Use this form and list extra serial numbers on the reverse side. FreeXWires must be purchased from a U.S. Dealer. Checks can only be sent to U.S. mailing address. This coupon and all material listed below must be supplied to Quantum by December 31, 2005 to be elegible for Rebate.
|
|
April 2005
INTRODUCING TURBO AC
ALL-DAY, CONTINUOUS POWER FOR QFLASH, SHOE & HANDLE MOUNT FLASH AND DIGITAL CAMERAS
Quantum's new Turbo AC (TAC) supplies photographers with reliable power for all-day studio and location shooting wherever AC power is available. Small and lightweight, take the Turbo AC anywhere in the world, it can be adapted to AC mains power from 100 - 240 VAC.
Mounting is fast and easy... the Turbo AC has a self-contained thread that screws into the socket on the bottom of a camera, and it accepts tripod threads for mounting to a tripod. An included Quantum clamp allows for mounting to a tripod or light stand leg.
Use the Turbo AC in the studio to power your Qflash, shoe or handle mount flash and digital camera simultaneously, with one power source. For location work, leave your studio lights home and pack light with Qflash and Turbo AC units. Use the Turbo AC for the Qflash room lights and your Turbo, Turbo 2x2 and Turbo Compact Batteries for the portable Qflash, shoe or handle mount flashes.
|
March 2005
NEW! D12 QTTL ADAPTER FOR i-TTL & D-TTL CAMERAS
The new Quantum D12 QTTL adapter is now compatible with the Fuji S3, Nikon D2H and D70.
Owner's of D12 QTTL adapters that purchased their adapters before March 2005 will need to send their D12 adapter to Quantum for a software upgrade so it will work with the the Nikon D2X, D70 or the Fuji S3... Cost for software upgrade, $39.
Quantum's QTTL D12 adapter links the new Fuji S3 & Nikon D70 to Quantum's Qflash. The D12 adapter interfaces with the Qflash T4d, T2D, X2D & X4D "Digital" flashes to provide full dedication to both digital and film professional cameras.
The following features are available with the Quantum D12 QTTL Adapter:
| i-TTL |
TTL Ratio / Fill-flash |
| D-TTL |
Auto Ratio / Fill-flash |
| Auto focus Assist |
Rear curtain sync |
| Pre-flash metering |
Shutter speed control |
| Viewfinder ready indicator |
The following cameras are supported by the D12 adapter.
| Camera Model |
QTTL |
Qflash Model |
 |
 |
 |
 |
 |
 |
 |
 |
Nikon
D2X, D2H, D70
N90s, F100, F5,
D1, D1H, D1X, D100,
Fuji S2, S3
Kodak Pro 14n, SLR/n |
D12 |
T4d / T2d / X2d |
|
iTTL
D-TTL@ |
|
|
|
|
|
|
| T2 / X2 |
- |
- |
- |
|
- |
- |
- |
|
| Feature available |
| - | Feature not available |
| @ | N90s does not support D-TTL / Matrix metering |
|
|
January 2005
New Canon Flash 580EX is Compatible with Quantum Batteries
Available Now
Connect a Turbo, Z or Turbo 2x2 Battery to the Canon 580Ex using Flash Cable CZ. Use the Flash Cable CCZ between the 580EX and a Turbo Compact when it is attached to the bottom of a camera or bracket. You get ultra fast recycling and all day capacity.
Turbos put approximately 330 volts into the flashes capacitor/flash tube circuit, bypassing the TTL and LCD low voltage circuits. "AA" batteries still must be used to power these low voltage circuits. All power packs display power remaining and charge level using an LED "fuel gauge".
Use a Quantum Battery 1+ or Quantum Battery 1 Compact with a power module MB5 connected into the flashes battery compartment. Use a Bantam Battery or
Quantum Battery 1 Compact with a power module XB5. You get consistent recycling and typically 5 times the capacity of "AA" batteries.
Flash Cable CZ / Turbo, Z, 2x2
Flash Cable CCZ / Turbo Compact
Flash Cable MB5 / Quantum Battery 1+, 1c
Flash Cable XB5 / Bantam Battery, Battery 1 Compact
|
December 2004
Turbo Power for the Nikon D70 Digital Camera
Connect the Quantum Turbo, or 2x2 and digital power cord CD100 or Turbo Compact and digital power cord YDC100 directly into the dc
input of the Nikon D70. The second output of the Turbo 2x2 can be used to power
any of the Qflash Digital flashes, Nikon SB800DX, SB80DX or other compatible flash units.
Turbo, 2x2 / Digital Camera Power Cord CD100 for Nikon D70
Turbo Compact / Digital Camera Power Cord YDC100 for Nikon D70
New! Turbo Flash Cable for the Olympus FL-50
In Stock Now!
Quantum Instruments introduces a new power cable CO5. Use the Quantum Turbo, Compact, 2x2 & Z to power the Olympus FL-50 flash.
Get "Non-Stop Flashtm" when connected to a Turbo. The Turbo provides faster flash sequences to keep up with camera motor drives. Turbos display remaining capacity on LED "fuel gauges" and have built-in smart chargers. Turbos are designed to be tough and shock resistant.
The Olympus FL-50 will also work with the following Quantum Batteries:
Bantam Battery & Quantum Battery 1 Compact XKZ3
Quantum Battery 1 Compact & Quantum Battery 1 + MKZ3
NEW! TURBO 2X2 POWER FOR LEAF VALEO, APTUS AND SINAR DIGITAL BACKS
Turbo 2x2 enables you to shoot all day on location,
when AC power is not available.
Connect the Quantum Turbo 2x2 and digital power cord SD16 directly into the dc input of a 5, 10, or 20 GB Leaf Digital Magazine to power a Valeo or Aptus Digital Back.
Connect the Quantum Turbo 2x2 and digital power cord SD12 directly into the back of the following Sinar products; Digital Back 22, 23, 43, 44 & 54, m Camera, Cyber Kit and Action Module.
The second output of the Turbo 2x2 can be used to power any of the Qflash Digital flashes or any other compatible flash for the optimum portable power solution.
The Quantum Turbo 2x2 is a portable power pack that either attaches to a belt or can be hung from your shoulder. It has more than enough capacity for you to shoot throughout the entire day on one charge. After using the Turbo 2x2 for your assignment you will still have enough power left in the Turbo 2x2 for downloading these images into your computer.
Turbo 2x2 gets its energy from Nickel Metal Hydride (NiMH) technology, providing concentrated power, quick flash recycling, no memory, and long life. Turbo 2x2 displays remaining capacity on its "fuel gauge" to insure that you won't be caught unaware. Indicators show power delivered to the camera and/or flash. When charging, the "fuel gauge" displays the charging progress.
Turbo 2x2 / Digital Camera Power Cord SD16 for Leaf Valeo and Aptus Digital Backs
Turbo Compact / Digital Camera Power Cord SD12 for Sinar Digital Backs
Nikon Flash SB600 Compatible
with Quantum Batteries
Quantum Instruments introduces a new power module XK6 to power the Nikon SB600.
Use a Quantum Battery 1 Compact or Bantam Battery with our new flash module XK6 connected into the flashes battery compartment. You get consistent recycling and typically 5 times the capacity of "AA" batteries.
If you have a Quantum Battery 1+ use a BQB adapter cord connected between the flash module XK6 and the QB1+ to deliver power to the Nikon SB600 flash.
All Quantum power packs display power remaining and charge level using an LED "fuel gauge". Quantum Batteries typically yield the same power as $2000 worth of "AA" batteries. Make sure you get the great birthday or anniversary photo. Remember, you only get one chance to take a once in-a-lifetime photo so make sure your flash is connected to a Quantum Battery.
News, wedding and other professional photographers depend on Quantum Batteries for their flash and power pack needs.
Module XK6 / Quantum Battery 1 Compact / Bantam Battery Nikon SB600
|
June 2004
Turbo 2x2 Power for Cell Phones & PDA's
COMING SOON
The only solution for portable auxiliary power... connect a new Quantum Auxiliary Power 12v Vehicle Socket (SD14) into a Turbo 2x2. Then attach your vehicle adapter from any of the products above to the SD14 and you're ready to go.
Photographers need extra power now more than ever. Quantum Turbo 2x2 provides this for your digital camera and flash. Now you can get this same power for your cell phone, or PDA.
Be assured of reliability because Turbo 2x2 uses the latest Nickel Metal Hydride battery technology, has a visible "gas gauge", and takes advantage of Quantum's proprietary, built-in charging circuitry.
Now you can go on assignment knowing that you have dependable power for any situation that may arise.
|
May 2004
Turbo 2x2 & Turbo Compact Power for the Nikon D2H Digital Camera
Connect the Quantum Turbo 2x2 and digital power cord SD10 or Turbo Compact and digital power cord YDC10 directly into the dc input of the Nikon D2H. The second output of either Turbo can be used to power either the Qflash Digital, Nikon SB800DX or SB80DX flash units.
Our smallest Turbo yet, the Turbo C weighs just 16 ounces and packs almost the same power of a standard Turbo. A self-contained thread screws into the socket on the bottom of a camera and Turbo C itself accepts tripod threads for mounting. The Turbo Compact is the perfect power pack for the photographer that doesn't want to be tethered to a power pack.
The Quantum Turbo 2x2 is a portable power pack that either attaches to a belt or can be hung from your shoulder. It has more than enough capacity for you to shoot throughout the entire day on one charge. After using the Turbo 2x2 for your assignment you will still have enough power left in the Turbo 2x2 for downloading these images into your computer.
Both Turbo's get their energy from Nickel Metal Hydride (NiMH) technology, providing concentrated power, quick flash recycling, no memory, and long life. Turbo's display remaining capacity on their "fuel gauge" in order to insure that you won't be caught unaware. Indicators show power delivered to the camera and/or flash. When charging, the "fuel gauge" displays the charging progress.
Turbo 2x2 / Digital Camera Power Cord SD10 for Nikon D2H
Turbo Compact / Digital Camera Power Cord YDC10 for Nikon D2H
|
April 2004
New! AC Power for Qpaq-X
Introducing the PR4 AC module, AC power for Quantum Qflash X series flashes connected to a Qpaq-X power pack.
Substitute a PR4 AC module for either a PB1 or PB2 battery, connect the PR4 module to an AC mains outlet, and have uninterrupted power for all-day studio shooting. You now have a studio quality flash system that is fully dedicated to your digital or film camera. For location use, just remove the PR4 module and attach either a PB1 or PB2 and you're ready to shoot outdoors.
In the studio or on location shoot i-TTL, D-TTL, A-TTL, E-TTL II, E-TTL or TTL with the Qflash X2D or TTL with the Qflash X/X2. QFlash recycling times are the same for AC or DC power. All models of Qflash can be used in the Manual, or TTL modes with a Quantum Softbox (QF68) for portraits. You can quickly interchange accessory reflectors for shooting bare bulb, wide angle, diffused or telephoto photos.
Pack light and be prepared for all lighting situations with an 800 watt-second Automatic, TTL, Manual Qpaq-X flash system.
Qflash® 4d does it all...
A-TTL i-TTL D-TTL E-TTL E-TTL II & QTTL®
New Features and Functions
In Automatic and Auto-fill, over/under exposure values are now shown in 1/3 stop increments on the LCD readout.
Qflash settings can be calibrated to light meter readings by the photographer for
personal fine tuning.
Flash exposure indicators on four sides blink for visual confirmation that the flash is okay, under or over exposed, or did not fire.
Twin accessory sockets accept control cables that coordinate multiple Qflash units.
Flash heads swivel and bounce and lock into position with one button control.
Modeling light feature for Qflash T4d.
Flash counter display gives total number of flashes up to 99, can be reset at a time.
The new back slanted design properly balances Qflash for bracket mounting.
Reflectors lock quickly into position with a twist.
Qflash T4d has includes all features of the Qflash T2D, plus the additional new features listed above.
Get beautiful, studio-quality lighting, perfect for digital and film photography, from a portable dedicated flash!
Qflash "Digital" model T4d is "dedicated" to the latest digital and film camera systems through its own QTTL® through-the-lens dedicated exposure control. Parabolic reflectors produce softer, cleaner light. And they quickly interchange for bare bulb, wide angle, diffused, and telephoto reflectors.
Qflash "digitals" are smaller and lighter than their predecessors. Flash heads swivel and bounce and lock into position with one button control.
In addition to full dedication Qflash operates in Manual, Auto, TTL, and Strobo modes. In automatic mode, Qflash power adjusts in 1/3 steps over wide ranges-- from f/1.4 to f/22 for ISO 100 film- in 25 precision settings. In manual mode Qflash displays 19 power settings from full to 1/64th power, in 1/3 step increments.
Multiple flash set-ups are easier because Qflash units communicate and coordinate through control cables, or wirelessly via FREEXWIRE digital transceivers. Model T4d gets its power from Quantum Turbo®, Turbo 2x2, or Turbo Compact.
Qflash power exceeds that of typical shoe-mount and handle-mount flashes, which allows for greater distances, bigger shots, and much more bounce power. That, combined with its studio quality light give professionals just the portable lighting they need.
QTTL Adapters
Quantum's QTTL system is fully dedicated to popular camera systems, such as Nikon*, Canon*, Contax*, Mamiya*, Olympus*, and more.
Using the QTTL adapter for your camera, Qflash "Digitals" display and track the camera f/number and film speed set in the camera, allow for rear curtain sync, and provide infra-red auto focus assist.
QTTL adapters can offset Qflash output between -3 to +2 stops (in 1/3 steps) in relation to the f/number setting on the camera. Even if your camera doesn't support fill/flash ratio, the QTTL ratio setting tracks the camera aperture as it changes, providing automatic fill/flash ratio!
Digital and film cameras that employ "pre-flash" metering are also supported by Quantum's QTTL adapters.
Click here for additional information.
New! Power Modules for Nikon SB800 Flash
Quantum Instruments introduces new power modules XKZ3 & MKZ3 to power the Nikon SB800.
Bantam Battery & Quantum Battery 1 Compact XKZ3
Quantum Battery 1 Compact & Quantum Battery 1 + MKZ3
Use the Quantum Turbo, Turbo 2x2, Turbo Compact or Turbo Z to power the Nikon SB800 with the CKE cable.
Get "Non-Stop Flash when connected to a Turbo. The Turbo provides faster flash sequences to keep up with camera motor drives. Turbo and Turbo Z display remaining capacity on LED "fuel gauges" and have built-in smart chargers. Turbos are designed touch and shock resistant. Choose Turbo for peak endurance, Turbo Z for lightweight action.
Performance is consistent, you'll never be without power when you need to capture that once in-a-lifetime photo.
|
December 2003
QUANTUM Qflash® Softbox
When the new 12 x 12 softbox (QF68) is attached to any model Qflash by removing the standard reflector and locking the softbox into its place, a bigger, softer light source for close-up portraiture is created. With the softbox connected, this combination can be mounted to a camera bracket or fastened to an umbrella bracket for placement on a light stand. The Qflash/softbox combination is suited for either TTL or manual operation. When finished shooting, the QF68 folds up very neatly into its carrying bag for your convenience. Retail List price is $78.
This new softbox joins the Qflash family of specialized reflectors that include: Wide Angle Diffuser (QF67A), Bare Bulb Enhancers (QF62Bs/g), Telephoto/Portrait (QF63B), and Snoot (QF61B).
Small, Portable Flash System
Qflash T/T2/d, FreeXwire, & Turbo Compact
The Turbo Compact makes a perfectly balanced platform for the Qflash T/T2/d after it is screwed into the base of the Qflash. Once the FreeXwire is added to this combination, the photographer has a small, remote-controlled flash system with the Turbo Compact, powering both the FreeXwire and Qflash. This system can be placed behind a bride and groom, in a church balcony, or anywhere else that extra punch is needed to enhance a photograph.
Our smallest Turbo yet, the Turbo C weighs just 16 ounces, yet it packs almost the same power of a standard Turbo. Turbo C displays remaining capacity on it's "fuel gauge" so that a busy photographer will not be caught unaware. Indicators show power delivered to the Qflash. When charging, a process that takes only 1½ hours, the "fuel gauge" displays the charging progress.
With the FreeXwire as part this equation, an extra dimension is added to your shooting repertoire. When used with Quantum's QTTL, TTL, or FW adapters and your 2¼ TTL camera, FreeWire provides wireless TTL control of remote Qflash T's.
|
October 2003
QUANTUM TURBO® COMPACT
-- For flash and Digital Cameras
Today's digital cameras and flash demand more power. Different voltages. The Turbo Compact is the portable power solution.
Power a digital camera and flash together with the Turbo Compact. The proper voltage for each camera model is automatically adjusted. To power a different camera or flash, change only the cable.
Turbo C's energy comes from Nickel Metal Hydride (NiMH) technology, providing concentrated power, quick flash recycling, no memory, and long life.
Turbo C displays remaining capacity on it's "fuel gauge" so that you won't be caught unaware.
Indicators show power delivered to the camera and/or flash. When charging, which takes just 1 ½ hours, the "fuel gauge" displays the charging progress.
Our smallest Turbo yet, the Turbo C weighs just 16 ounces yet packs almost the same power of a standard Turbo. A self-contained thread screws into the socket on the bottom of a camera, and Turbo C itself accepts tripod threads for mounting.
Flash Cables and Camera Cables
Special, shorter cables for cameras and flashes neatly connect to your equipment.
"YDC" series Camera Cables power digital cameras.
"CC" series Flash Cables are 1.5' (.5m) long for use with Turbo Compact mounted under a camera.
Visit the Turbo Compact page to find out more and check our cable compatibility chart to find the right cable for your equipment.
|
June 2003
Quantum Turbo 2x2 Power for the Kodak DCS Pro 14n Digital Camera
Connect the Quantum Turbo 2x2 directly into the dc input of the Kodak Pro 14n using the new Quantum digital camera power cord SD8. The second output of the Turbo 2x2 can be used to power either the Qflash Digital, Nikon SB80DX or SB28DX flash units.
The Quantum Turbo 2x2 is a lightweight portable power pack. It has more than enough capacity for you to shoot throughout
the day on one charge. Turbo 2x2 power a digital camera from one cable, and a flash through another. The proper voltage
for each camera model is automatically adjusted. To power a different camera or flash, change only the cable. Use the
Turbo 2x2 when taking digital pictures and still have enough power left for downloading these images into your
computer.
Quantum Turbo 2x2 / SD8 for Kodak Pro 14n
Quantum Battery Power for the Sigma SD9 Digital Camera
Connect the Quantum Turbo 2x2 w/camera cable SD4, Quantum Battery 1 Compact
w/power module XDC4 or the Quantum Battery 1+ w/power module MDC4
to get extended battery life for the Sigma SD9. Connect either power cord directly into the
dc input of this camera.
The Quantum Turbo 2x2 is a lightweight portable power pack. It has more than enough capacity for you to shoot throughout
the day on one charge. Mount the Quantum Battery 1 Compact under the camera and get 12 ounces of concentrated power.
The Quantum Battery 1+ offers 30% more capacity and clips onto your belt. Use any of these Quantum Batteries when taking
digital pictures and still have enough power left for downloading these images into your computer.
Quantum Turbo 2x2 / SD4
Quantum Battery 1 Compact / XDC4
Quantum Battery 1+ / MDC4
|
May 2003
Kodak Pro 14n, Canon EOS 1D, 1Ds & 10D
Compatible with Qflash T2D / X2D
The New Kodak Pro 14n is compatible with the Quantum D12 QTTL adapter and the Canon EOS 1D, 1Ds and 10D are compatible
with the D13n QTTL adapter. Quantum’s new QTTL™ adapters link the New Kodak Pro 14n and Canon EOS 1D, 1Ds & 10D
digital cameras including high end EOS film cameras to Quantum’s Qflash. QTTL adapters and upgraded Qflash T2D and
X2D “Digital” flashes provide full dedication to these professional digital and film cameras.
All Quantum Qflash T2 and X2 flashes can be upgraded to models T2D and X2D. See the new Qflash Digital models and
additional features on the other side!
See Digital Qflash page for details.
|
November 2002
Introducing upgraded Qflash T2D and X2D “Digital”
Upgrades Now Available
QFT2D & QTTL's Now shipping to Dealers
Quantum's new Qflash T2D and X2D Digital are upgrades providing new features for the working pro shooter.
And they provide dedication to the latest digital and film cameras using Quantum's new QTTL™ dedicated adapters!
All Qflash T2 and X2 models can be upgraded to T2D Digital and X2D Digital. The cost is $129.00 including
shipping back to you. It takes 5-10 days from the time Quantum receives a Qflash T2 or X2. Contact your
dealer or Quantum to arrange for your upgrade.
Here are the new capabilities:
Full TTL Dedication for new digital and film cameras
Automatic Fill Mode
This mode allows setting fill flash ratios when used with one
of the new QTTL adapters. Fill-flash ratios can be controlled
even for cameras that do not have fill-flash capabilities!
Automatic Sensor Limit
This option on the T2 / X2 limits the distance the Qflash sensor
“sees” when in Auto mode.
Without Auto Sensor Limit, if the subject has no background
(in a open field outside), or the background is far away
(a large catering hall), the flash sensor tries to balance the
subject and background light. The subject is bright, and
the background is dark, and the result is an over exposed subject.
By limiting sensor distance, the sensor will no longer try to balance
the light from a far background and will focus only on the subjects
that are within the sensor limit. The result: great automatic
exposures in all situations!
Quick Turn off
If you are using Qflash as an on-camera flash and want to disable the flash for a few shots you can use
the “quick turn off” feature. Press the MODE button twice and the word “OFF” appears in the display.
Press any button (except the test flash) to return to normal operation.
Twice as many Program Modes
The number of Qflash set-ups which can be saved has been increased from 4 to 8. These saved modes
can be selected with one button when you’re on the go.
New ! Turbo 2x2 Power for digicams and flash
Twice the power, dual outputs, smaller than the standard Turbo.
For power hungry digital cameras and flashes, Quantum stuffed twice the power into a smaller package.
And, now you have two connections, for a camera and flash, two cameras, or two flashes!
Photographers need reliable power now more than ever. Quantum Turbo 2x2 provides programmable
low voltage for your digicam, and high voltage for your flash at the same time. Now your flash keeps up
with your camera, and camera with flash.
Be assured of reliability because Turbo 2x2 uses the latest Nickel Metal Hydride battery technology,
visible “gas gauge”, and Quantum’s proprietary, built-in charging circuitry.
We have cables for all popular
digicams and flashes. See digital page for details.
Now you can shoot long, demanding jobs with added “power security”. See your photo dealer.
Full power flash shots, with and without digicam power*
*Requires optional Turbo Cable (except Qflash) and/or camera power cable. Time and shots will vary with shooting
style. Digicams are Nikon D1, Canon 1D and similar types.
Available Now, Check with your Dealer.
|
October 2002
New Digital & Film Camera QTTL’s w/ Infra-Red focus assist
Look for announcement on web site - Estimated delivery November, 2002
Pricing TBA
Quantum QTTL dedicated adapters will support the following features.
Full Dedication...Auto Focus Assist...Pre Flash TTL Control...TTL Ratio / Fill Flash...Automatic Ratio / Fill Flash...Rear Curtain Sync
Digital TTL’s with Infra-Red focus assist
D12 - for Nikon D1, D1x, D1h & D100
for Fuji S1 & S2
D13n - for Canon EOS 1D, D30 & D60
Conventional TTL’s with Infra-Red focus assist
D24 - For Contax 645
D25 - For Mamiya 645AFD / AF
|
August 2002
Quantum Power for the Canon EOS 1D Digital Camera
Quantum Instruments Inc. announces our new MDC6 power cord. A Quantum Battery 5+ (QB5+) using a heavy duty power cord
MDC6, supplies power to the Canon EOS 1D digital camera. Just connect the MDC6 into the cameras DC input jack and you're
ready to go.
You’ll never be caught without power for the Canon EOS 1D digital camera. Quantum Battery 5+’s high capacity and “fuel gauge”
LED monitor keep you up and running. Power comes from reliable sealed lead cells which exhibit none of the “memory” effects of
some other types of batteries. Simply charge the QB5+ to full capacity, reliably at any time.
Available at Quantum dealers September 2002.
|
May 2002
New Nikon Flash SB80 is Compatible with Quantum Batteries
Connect a Turbo or Turbo Z Battery to the Nikon SB80 using Turbo Cable CKE. You get ultra fast recycling and all day capacity.
The Turbo puts approximately 330 volts into the flashes capacitor/flash tube circuit, bypassing the TTL and LCD
low voltage circuits. “AA” batteries still must be used to power these low voltage circuits.
Use a Quantum Battery 1+ or Quantum Battery 1 Compact with a power module MKZ2 connected into the flashes battery compartment. Use a Bantam Battery or Quantum Battery 1 Compact with a power module XKZ2.
You get consistent recycling and typically 5 times the capacity of “AA” batteries.
All power packs display power remaining and charge level using an LED “fuel gauge”. Quantum Batteries typically yield the same power as $2000 worth of “AA” batteries.
Focus and Trigger The Kodak DCS 760 Digital Camera Remotely with a FreeWire Two Step Motor Drive Cord
Quantum’s new Two Step Motor Drive Cords for FreeWire wireless Digital Transceivers let you focus and trigger your camera at great distances without wires.
Now you can use the Kodak DCS 760 Digital Camera with the FreeWire Two Step Motor Drive Cord FW44 in conjunction with FreeWire wireless Digital Transceivers.
Put the Kodak DCS 760 Digital Camera behind a soccer goal net, for a photo with a different perspective. In the studio, have freedom of movement when taking children portraits- no more standing behind your camera viewfinder.
Connect the two step motor drive cord FW44 to a FreeWire Digital Transceiver (FW10). Mount and connect it to your remote camera. Connect as many of these remote FreeWire/Camera combos as needed and you’re ready to go. Press & holding the test button down on your hand held FreeWire Digital Transceiver will transmit the signal to wake up, focus and fire all remote cameras.
If you own an auto focus camera, a two step motor drive cord is an invaluable aid for triggering your camera remotely.
Quantum Battery Power for the Minolta Dimage 7 & Nikon COOLPIX 995 Digital Cameras
Power Cords XDC4/XDC2 are short, coiled cords with a molded right angle connector that plugs directly into the DC input of a digital camera. Use the XDC4 with the Minolta Dimage 7 or XDC2 with the Nikon COOLPIX 995. Connect either of these combinations to the Quantum Battery 1 Compact (QB1c) for a dependable, long lasting power source. For extended power, 30% more, connect either of these digital cameras to a Quantum Battery 1+ (QB1+).
The motor drive shaped QB1c screws into the tripod socket of the Minolta Dimage 7 or Nikon COOLPIX 995 to make a compact unit. Or clip QB1c on your belt using extension cord BEX. A third mounting choice allows you to mount your digital camera and QB1c on a tripod, using the optional Offset Multi Bracket QBO.
Just 1-3/4” wide, the Quantum Battery 1+ (QB1+) clips to your belt, power from the QB1+ is transferred directly to your camera through a heavy duty power cord especially designed for your digital camera. Use the MDC4 with the Minolta Dimage 7 or MDC2 with the Nikon COOLPIX 995. Mount your digital camera and QB1+ to a tripod using the Quantum Battery Clamp (QBC) to attach the QB1+.
Both the Quantum Battery 1 Compact and Battery 1+ have a power monitor “fuel gauge” showing remaining power. Both power packs charge in 4 hours and have a full charge indicator.
FreeWire and Qflash provide wired or wireless TTL control from the new Contax N1
Get all the camera / flash TTL functions including flash TTL compensation! Choose a conventional “wired” connection by connecting a QF24 TTL adapter between the Contax N1 and a Qflash (any model).
Or, go for “wireless” control using a FreeWire Digital Transceiver (FW10) and FW64 TTL adapter connected to the Contax. Then, connect any number of remote FreeWire / Qflash units for single or multi-flash coordinated wireless TTL!
For either set up, choose a flash TTL mode on the Contax N1, dial in any flash compensation desired, and the camera will direct the flash when to turn on and off for your chosen setting.
When in TTL mode Qflash indicates “OK”, “Under”, or “Over” exposure for each TTL photo you take. Both TTL adapters are mounted on the camera’s hot shoe and plug into the accessory input of Qflash. The QF24 and FW64 can be used with all Qflash models and both Contax N1 and 645 models.
|
February 2002
Focus and Trigger Your Camera Remotely with FreeWire Two Step Motor Drive Cords
Quantum’s new Two Step Motor Drive Cords for FreeWire wireless Digital Transceivers let you focus and trigger your camera at great distances without wires.
Typical wireless triggers only release shutters on remote cameras. Modern cameras with auto focus require a moment to focus, then release the shutter. FreeWire Digital Transceivers have the built-in capability to do that wirelessly, and our two-step motor drive cords work with popular brands of cameras.
Put your secondary camera behind a basketball court, back board for a photo with a different perspective. Setup a remote camera for a wildlife photo. In the studio, take away sync cords to trip over. Have freedom of movement when taking fashion portraits- no more standing behind your camera viewfinder.
Quantum’s two step motor drive cords work with the following brands of cameras:
FW41 two step MD cord for Contax 645
FW42 two step MD cord for Maxxum 7, 9
FW43 two step MD cord for Canon EOS 1V, 3, D2000, D30
FW44 two step MD cord for Nikon D1/x/h, F5, N90/S, F90X, F100
FW45 two step MD cord for Mamiya 645AF, 645D
FW46 two step MD cord for Canon EOS 1, 1N, A2, A2E, AS, 620, T90
FW47 two step MD cord for Pentax 645N & All Autofocus SLR Cameras except Z-1p
Connect any of the above two step motor drive cords to a FreeWire Digital Transceiver (FW10). Mount and connect it to your remote camera. Connect as many of these remote FreeWire/Camera combos as needed and you’re ready to go. Pressing the test button on your hand held FreeWire Digital Transceiver will transmit the signal to wake up, focus and fire all remote cameras.
If you own an auto focus camera, a two step motor drive cord is an invaluable aid for triggering your camera remotely.
|
January 2002
FW26 Multi Clip for FreeWire
The FW26 Multi Clip attaches to the back of your FreeWire enabling the unit to be clipped to your belt, accessory bracket or light stand (using the optional QBC mounting clamp).
Because the Multi Clip can swivel it enables you to attach your FreeWire to many different types of brackets but still maintain the proper alignment for the antenna.
Wireless TTL control of Qflash with FreeWire Transceivers!
Quantum’s new TTL adapters for FreeWire wireless transceivers let your camera control flash exposure without wires.
For location portraiture (beach, desert, park, etc.) use wireless TTL when photographing subjects at longer distances, when TTL cables are not practical.
For commercial photography mount a Qflash in a light box and shoot wireless TTL for camera controlled soft lighting.
Quantum’s wireless TTL adapters work with both Qflash T & Qflash X series and the following brands of cameras:
FW52 wireless TTL adapter for Nikon
(Nikon D1, D1H & D1X are not compatible with FW52)
FW53N wireless TTL adapter for Canon
(Canon D30 is not compatible with FW53N)
FW57 wireless TTL adapter for Pentax
FW59 wireless TTL adapter for Hasselblad
FW60 wireless TTL adapter for Bronica
FW64 wireless TTL adapter for Contax 645
FW65 wireless TTL adapter for Mamiya 645AF
Connect any of the above TTL adapters to a FreeWire Transceiver (FW10). Mount it to your camera hot shoe. If your camera has no hot shoe the FreeWire TTL adapter comes with a TTL cable that plugs into the camera. Connect as many remote FreeWire / Qflash combos as needed and you’re ready to go. The FreeWire at the camera will transmit the TTL information received from the camera to all the Qflash’s set to TTL mode.
A FreeWire with a TTL adapter is a must have for the TTL shooter. Qflash, FreeWire combos can be positioned without the worry of TTL extension cables getting in the way.
If your dealer does not have any of the above items in stock please have them contact Quantum to place an order.
FW33 replaces QF52 when used with FreeWire
FW33 "Y" connector is used to set up a wireless TTL control when using Qflash, QF series TTL adapter, and FreeWire FW10. It provides SYNC and TTL connection between Qflash, TTL adapter and an FW10 transmitter unit.
|
November 2001
FreeWire and Qflash provide wired or wireless TTL control from the new Mamiya 645AFD
Get all the camera / flash TTL functions including flash TTL compensation! Choose a conventional “wired” connection by connecting a QF25 TTL adapter between the Mamiya 645AFD and a Qflash (any model).
Or, go for “wireless” control using a FreeWire Digital Transceiver FW10 and FW65 TTL adapter connected to the Mamiya. Then, connect any number of remote FreeWire / Qflash units for single or multi-flash coordinated wireless TTL!
For either set up, choose a flash TTL mode on the Mamiya 645AFD, dial in any flash compensation desired, and the camera will direct the flash when to turn on and off for your chosen setting.
When in TTL mode Qflash indicates “OK”, “Under”, or “Over” exposure for | | |
